How to Use Mean of DICE Test Unit Perform Full Test for Volvo DICE

This illustration show the detail information of how to perform Volvo DICE full test by mean of DICE test unit.
2019 Volvo PROSIS Offline Parts+Repair
2019 Volvo Penta EPC 6 Download

Preparations:
Volvo VIDA DICE 2014D Software Free Download
How to Install Volvo VIDA 2014D Software on Win 7

DICE Full Test by Mean of DICE Test Unit:
1.Find the DiCE Test Unit
2.Power up the DiCE by connecting 12 V DC, part number 9513004, to the DiCE Test Unit. NOTE! The power LED should now be lit.

3.Connect the DiCE to the DiCE Test Unit. NOTE! The vehicle interface status LED is now lit (firm red light).

4.Start VIDA All-in-one. Select the START tab.

5.Click on PERFORM COMPUTER SETTINGS and then the COMMUNICATION TOOL tab.

6.Click on the dots beside the DiCE option in the drop-down list for the COMMUNICATION TOOL.

7.In the DiCE unit drop-down list, select the appropriate DiCE and click the Test communication tool.

8.Click on RUN

9.Set the DiCE Test Unit Switch to position 1. Click on OK.

10.Set the DiCE Unit Switch to position 2. Click on OK. Click on CLOSE.


11.CONGRATULATIONS! You have successfully managed to perform a DiCE Full Test by means of DiCE Test Unit.

12.If this will not work, the following will be shown:

Please check thouroughly the switch positions and try again. If it still does not work, the DiCE Unit is out of order and has to be replaced.

Repeat this section for both DiCE connected via USB and Bluetooth.


From Auto Repair Technician Home, post How to: Volvo DICE Full Test by Mean of DICE Test Unit

How to Use Volvo VIDA 2014D Diagnose Volvo XC90 2005

This article show you guide on how to use VIDA 2014D read and clear diagnostic trouble codes for Volvo XC90 2005.

Preparations:

Volvo VIDA DICE 2014D Software Free Download

Procedures:

Connect VXDIAG NANO Volvo diagnostic tool to Volvo XC90 OBD port,build connection.


Then run VIDA 2014D software,and enter account number admin,then click “LOG IN”




Click vehicle identification




Select “VXDIAG” communication tool,then click “READ VEHICLE”

After vehicle identification,it will show you the vehicle information

Click “OK” to continue






Select “DIAGNOSTICS” option,then it will start identifying




Read and Clear DTCs,please click “FAULT TRACE”



Select “Delivery” tag,and click “ERASE ALL” to start clearing



Several DTC tests do not run continuously as specific start and operation conditions are required in addition to ignition on.Example of such conditions are that the function is activated,engine is running engine has reached normal operating temperature and so on.

Please ensure all of the control modules are forced into a new operation cycle,please do as follows:

Ignition off

Start the engine and rev it above 1500rpm

Turn ignition off i.e stop the engine

Start the engine again and let it idle for approx. 20 seconds

Select OK to read out DTC status.



Diagnostic trouble codes have been eliminated.



From Auto Repair Technician Home, post VIDA 2014D Read & Clear DTCs for Volvo XC90 2005