How to Use VCP Daignostic tool to Adapt DPF for VW 2.0/2.7/3.0 TDi/VW Crafter

Here is a step-by-step guide on how to use VCP diagnostic system to do DPF adaption for VW 2.0/2.7/3.0 TDi/VW Crafter.

User VW EPC software:Newest VW ETKA 8.1 software.


Preparations:
How to Install VCP System Diagnostic Tool Software
VCP System Professional Diagnostic Tool Software Download

Procedures:
Connect your VCP System interface to vehicle,and enter menu to select “Guided functions assistant”
Select “DPF” from right bar
Select “DPF Adaptation after replacement 2.0/2.7/3.0 TDi/VW Crafter”

Procedure adapts the motor controller after installing new DPF-Filter.Works on cars 2.0/2.7/3.0 TDi and VW Crafter with EDC16.
Warning:
Some 2.0TDI blueMotion models due to an error int he motor ECU software do not take the new adaptive value.The solution to this problem is to upgrade the software in engine ECU.

Conditions:
Ignition on
The engine is not running

Select car model/engine type

Now you need to enter mileage fro the last DPF-replacement

Procedure will be started
Turn on ignition
Don’t start the engine
After pressing “Next” the procedure will begin

http://www.autoepccatalog.com