Volvo five electronic control modules are used; the Engine Management System (EMS) Module, Instrument Cluster Module (ICM), Vehicle Electronic Control Unit (VECU),
Volvo PTT Download 2022
Transmission Electronic Control Unit (TECU) and the Gear Selector Electronic Control Unit (GSECU).
Together, these modules operate and communicate through the J1939 high speed serial data line to control a variety of engine and vehicle cab functions. The Engine Management System (EMS) Module controls fuel timing and delivery, fan operation, engine protection functions, engine brake operation, the EGR valve, and the turbocharger nozzle. The Vehicle Electronic Control Unit (VECU) controls cruise control functions, accessory relay controls and idle shutdown functions. The Instrument Cluster Module (ICM) primarily displays operational parameters and communicates these to the other ECU’s.
All have the capability to communicate over the J1587 normal speed data lines primarily for programming, diagnostics and data reporting. It is a full guide on Volvo VT engine sensors guide
2022 Volvo PTT Diagnostic Software Download
Engine Coolant Temperature (ECT) Sensor
The Engine Coolant Temperature Sensor is located at the front of the engine. The sensor will indicate a high coolant temperature caused by problems like radiator blockage, thermostat failure, heavy load, or high ambientD Design and Function temperatures. This sensor is also used for cold start enhancement and for fan clutch engagement.
Engine Oil Pressure (EOP) Sensor
The Engine Oil Pressure Sensor contains a pressure sensitive diaphragm and a electrical amplifier. Mechanical pressure applied to the diaphragm causes the diaphragm to deflect and the amplifier to produce an electrical signal proportional to the deflection.
The Engine Oil Pressure Sensor is located on the oil filter assembly. The sensor monitors engine oil pressure to warn of lubrication system failure.
Engine Oil Level (EOL) Sensor
The Engine Oil Level Sensor is located in the oil pan.
Engine Oil Temperature (EOT) Sensor
The Engine Oil Temperature Sensor is a thermistor whose resistance varies inversely to temperature. The sensor has a negative temperature coefficient, which means the sensor resistance will decrease as the engine oil temperature increases.
The Engine Oil Temperature Sensor is located in the oil pan.
Exhaust Temperature Sensor (DPF Sensors)
The exhaust gas temperature sensor detects exhaust gas temperature for DPF protection as well as DPF
regeneration control. The sensor modifies a voltage signal from the control unit. The modified signal returns to the control unit as the exhaust temperature at that specific location of the exhaust. The sensor uses a thermistor that is sensitive to the change in temperature.
The Exhaust Temperature Sensors are located in the DPF assembly.
Fuel Pressure Sensor The fuel pressure sensor contains a diaphragm that senses fuel pressure. A pressure change causes the diaphragm to flex, inducing a stress or strain in the diaphragm. The resistor values in the sensor change in proportion to the stress applied to the diaphragm and produces an electrical output.
The Fuel Pressure Sensor is located on top of the fuel filter housing.
