How to Use Honda HDS Program New Key for Honda Odyssey 2008

When the Honda ECM/PCM is replaced, it is necessary to be recognized a code each other to the ECM/PCM and the Immobilizer Control Unit-Receiver with the HDS. Also, the vehicle with Keyless Access System needs to be recognized a code each other to the ECM/PCM and Keyless Access Control Unit. Otherwise, the engine cannot be started.

Preparations:
How to Install Honda HDS Software for DIY
Newest Honda HDS V104 V102  Free Download
Honda HDS 3.104.002+I-HDS+ECU Rewrite+Immobilizer Tool
Procedures:
System Selection Menu, click [IMMOBI]
Note:Not all systems may be available on this vehicle.Refer to the Service Manual for further information.

Honda HDS Programming Honda ECM/PCM Replacement

 Accessing to Honda key/immobilizer codes require the employee’s personal information to be entered in order to maintain accountability and ensure personal responsibility. To calculate PCM access codes for Honda vehicles (Honda Insight, Civic, Accord, Prelude, S2000, CR-V, Odyssey, Pilot, Element, Ridgeline, Fit and others…) you need to know last 5 digits of VIN (Vehicle Identification Number).

These codes are required for access security procedures with HDS (Honda Diagnostic System) and other OEM equipment



What we need?

Honda HDS HIM Diagnostic Tool

HDS IMMO PCM Code Calculator

Honda HDS Software Download

How to Install Honda HDS Software for DIY

Aftermarket Honda HDS Multiplatform Software Install



Reparation:

No need to install HDS IMMO PCM code calculator, directly run and use. Connect the USB Dongle when you calculate the PCM Code.
Keep down VIN number, PCM code etc on paper.

Step-by-step ECM/PCM replacement instructions:

1)Connect Honda HDS device into the OBD port located under the dashboard on driver’s side.
2) Turn the vehicle ignition to ON
3) Ensure your HDS HIM is well communicated with the ECM/PCM and other vehicle systems.
4) Select “PGM-F1” in the HDS program
5) Select “INSPECTION MENU” in HDS system
6) Select “ETCS TEST” and then select “TP POSITION CHECK”. Follow the screen prompts.
If fail to select TP POSITION CHECK, repeat the procedure.
7) Select “REPLACE ECM/PCM MENU” and then select “READ DATA”, and follow the screen prompts. The procedure will read the engine oil life data from the original ECM/PCM. If fail to read data, repeat the procedure. You are able to download (WRITES) it into the new ECM/PCM.
8) Select “A/T” system in the HDS program
9) Select “REPLACE TCM/PCM MENU”, then select “READ DATA”. Follow the screen prompts. Ignore SCS line.
10) Turn the vehicle ignition to LOCK (0)
11) Remove the ECM/PCM cover (A)

12)Remove the battery holder (B) and put it away from ECM/PCM.
13) Remove the bolts (D) and loosen the bolt (E)

14) Disconnect ECM/PCM connectors A, B, and C, then remove the ECM/PCM (F).
NOTE: ECM/PCM connectors A, B, and C have symbols (A=□, B=△, C=○) embossed on them for identification.
15) Install ECM/PCM in reverse order of removal
16) Turn the ignition switch to ON
17) Enter the VIN which already actually calculated by HDS IMMO VIN Code calculator to ECM/PCM.
18) Select “PGM-FI” system in HDS program
19) Select “REPLACE ECM/PCM MENU”, then select “WRITE DATA”
20) Select “A/T SYSTEM” in HDS
21) Repeat Step 20). Select “REPLACE ECM/PCM MENU”, then select “WRITE DATA”
22) Select “IMMOBI” system in HDS
23) Manually enter the immobilizer ECM/PCM code that you got previously, and use the ECM/PCM replacement procedure in the HDS; it allows you to start the engine.
24) If the system fails to TP POSITION CHECK, clean the throttle body
25) If the system fails to READ DATA or WRITE DATA, replace the engine oil and the engine oil filter.
26) Select the PGM-FI system, and reset the ECM/PCM with the HDS.
27) Update the ECM/PCM if it does not have the latest software.
28) Do the ECM/PCM idle learn procedure.
29) Do the CKP pattern learn procedure.

From Auto Repair Technician Home, post Honda ECM/PCM Replacement by Honda HDS

How To Set Up Honda HDS Diagnostic Connectivity Test In Multi-diag J2534

Customer Q: Can I use the Honda HDS (Honda's Diagnostic System) software with China Copy version of the ACTIA II 2013 Multi-diag J2534 Multi-diagnostic Tool?
Ancel Scanner

Answer: Yes, our engineers have tested its work.

 Newest Honda HDS V3.102.038 Free Download
Disclaimer: This is the test result of our customers. We are only responsible for describing the specific operational risks
How do I use the XTH MVCI Honda HDS software for the PassThru XS device of the ACTIA Multi-diagnostic Tool J2534?
You better install HDS on Window XP!
Please install MVCI HDS software version V2.21 or laterDouble-click "Honda PassStreet.reg" and agree to add data to the registry.Install the PassThru driver using the default parameters (download the latest available version from http://www.passthruxs.com/download.htm)HDS running software, enter the configuration page, communication interface select "SPX-MVCI"xhorse-MVCI Honda-HDS
carry out.
note:
Our customers have tested HDS on the II-2013 Multidiag J2534 and have not tried other versions (I-2014 2013V, etc.). If the configuration fails 2013.02V, you can try around other versions.
If you cannot find Honda HDS through HDS installation or installation during thru.reg process, only discover MVCI Wireless, MVCI Update, MVCI Register, which shows MVCI USB IP address, MVCI Ethernet IP address and MVCI wireless IP address 

 Here is the solution:
solution:Run Honda HDS software, click on the screen above F12, click on the button "Select New Device" and you will hear a "click" sound to connect ACTIA's PassThru device. Look for the arrow Click on the communication interface. You should see more diagnostics of your ACTIA, if not you must get your driver repaired
http://www.car-auto-repair.com