Here show you guide on how to access & remove Windows for Chrysler Pacifica 2017.
Related Contents:
Jeep Chrysler Dodge EPC5 2021 2018 FCA Free Download
Procedures:
1. Remove or protect components and the surrounding areas from sparks and welding spatter as necessary
2. With the use of a cut-off wheel, cut a “U” shaped access point (1) in the area of the PUR foam location.
3. Carefully, pry open the window to gain access to the PUR foam (2).
4. With the use of a flat bladed tool (1) or equivalent, remove the foam from the cavity.
5. Close the window back into the original position.
6. Close the access hole by either welding or alternatively with a structural adhesive patch.Weld
a. Grind the edges to remove the coatings to expose the bare metal.
b. Stitch weld the window (1) closed using the appropriate method as found in Standardized Steel Identification (Refer to 31 - Collision Information/ Specifications/Standardized Steel Identifications).
c. With the use of a grinding disc, smooth the weld.
Structural Adhesive
a. Create a metal patch 25 mm (1 in) larger than the opening.
b. Grind 13 mm (0.5 in) of the outer edge of the patch and the opening to expose bare metal.
c. Apply structural adhesive to the bare metal on the patch.
d. Position the patch to the opening and clamp into place.
e. Remove any squeeze-out adhesive and allow to cure per recommendations.
7. Refinish as necessary.
8. Apply inner panel corrosion inhibiting materials (Mopar Cavity Wax part #68042970AA, or equivalent).
