Tuesday, December 16, 2025

How to Solve JCB 140 205 Excavator Fuel Level Low Alarm C101D?

How to Solve C101D-68- Fuel Level Low Alarm.(For JS140 Side mounted Sensor) .

 

JCB DLA

JCB ServiceMaster 4




Possible Cause: 
1. Fuel Level is low in the fuel tank.
2. Fuel sensor not connected to machine revolver harness.
3. Faulty fuel sensor.
 

Diagnosis: 
1. Check the fuel level in fuel tank.
2. Check fuel senor connection with machine revolver harness.
3. Check the resistance output of fuel sensor between machine grounds & Pin no “B” of fuel sensor. 

Fuel sensor.
output shall be between 12Ω - 100Ω Refer below photograph for fuel sensor connection. 

Corrective Action:-
1. Refill the fuel in the tank
2. Connect properly fuel sensor with revolver wire harness.
3. Replace the fuel sensor.

https://www.car-auto-repair.com

Scania Truck ALM 512 Micro Switch Door Lock Driver's Side Short Circuit

Here is the instruction show you guide on how to solve Scania truck Micro switch door lock driver's side (truck)/micro switch A1 (bus), ...