This instruction show you guide on how to remove injector for Mitsubishi diesel D04EG engine.
Related Contents:
Mitsubishi FUSO V.C.I Diagnostic Kit
Mitsubishi EngineScope Diagnostic Software 12.4
Procedures:
(1) Remove the harness.
(2) Fix the fuel inlet connector of injector with wrench,loosen the injection pipe nut and remove the injection pipe.
(3) Fully press the pin at the top injector and remove the leak-off hose.
(4) Remove the connector of main harness and the injector connector.
(5) Loosen the nozzle gland bolt, and remove the injector together with the nozzle gland using the injector puller.
(6) Remove the gasket at injector inserting port in cylinder head.
(7) Install the protection cap to the injector immediately after the removal to avoid dust entering.
Note: Wait 30 seconds or more after the engine stop to start the injector removal job.
https://www.car-auto-repair.com
