How to Remove Transfer Oil Replacement for Hyundai ix35

This instruction show you guide on how to transfer oil replacement for Hyundai ix35.

Procedures:
1. Transfer oil is not replaced in normal condition.But it should be replaced every 75,000 miles in severe driving conditions.

Hyundai EPC KIA EPC 2022


Severe driving conditions
1. Driving in dusty, rough roads
2. Drivng in mountains areas
3. Driving for patrol car, taxi, commercial car or vehicle towing
4. Driving over 170Km/h

Removal
1. Disconnect the (-) terminal from the battery.
2. Lift up the vehicle.
3. Remove the front muffler
4. Remove the propeller shaft bolts.(A-4ea)
Tightening torque :
49.0~68.6N.m (5.0~7.0kgf.m, 36.2~50.6lb-ft)
Install the propeller shaft to be near runout marking (Transfer assembly 1ea, Propeller shaft 1ea) each other.

 

Hyundai EPC KIA EPC Free Download

 
5. Remove the right driveshaft (passanger side) from the transfer case. (Refer to "Drive shaft" in DS group)
6. Remove the roll lod bracket(C) after removing bolt(A,B).
Tightening torque :
(A) 107.9~127.5N.m (11~13kgf.m, 79.6~94.1lb-ft)
(B) 49.0~63.7N.m (5.0~6.5kgf.m, 36.2~47.0lb-ft)
7. Remove the transfer case up and down mounting bolt (A-4ea, B-1ea).
Tightening torque :
(A, B) 60.8~65.7N.m (6.2~6.7kgf.m, 44.8~48.5lb-ft)
8. Remove the transfer case with the lever after supporting the transfer case with a jack.Installation

Installation:
1. Installation is the reverse of removal.
• Be careful not to damage the O-ring (A). If the O-ring take damage, replace new one.
• Smear involute splines (B) all covering with molybdenum type high pressure grease.
TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT

https://www.car-auto-repair.com

Hyundai Excavator 210LC-7 Tech Information & Reviews

Here is a instruction and reviews on Hyundai excavator 210LC-7.

Related Contents:
Hyundai Heavy Industries e-Catalogue EPC Installation Service

Visibility
Even more visibility than before, for safer, more efficient operating.

Excellent Ventilation
Ventilation has been improved by the addition of the larger fresh air intake system, and by providing additional air flow throughout the cab.
Sliding front and side windows provide improved ventilation.
A large sunroof offers upward visibility and additional ventilation.

Comfortable Operator Environment
The control levers and seat can be adjusted to provide maximum operator comfort.
The seat is fully adjustable for optimum operating position, reducing operator fatigue.
Console boxes slide forward and backward for improved accessibility.
The proportional pressure controls reduce unnecessary exertion while ensuring precise operation.
Large windows allow excellent visibility in all directions.

Low Noise Design
The Robex 7 series was designed with low operation noise in mind.
Hyundai engineering helps to keep interior and exterior noise levels to a minimum.
The cab's noise levels have been additionally reduced by improving the door seals for the cab and engine compartments.
An insulated diesel engine compartment with sound-damping material also reduces noise.
http://www.car-auto-repair.com

Advanced CAPO System
The Advanced CAPO(Computer Aided Power Optimization) system maintains engine and mutual pump power at optimum levels. Mode selections
are designed for various work loads and maintaining high performance while reducing fuel consumption.
Features such as auto deceleration and power boost are included in the system.
The system monitors engine speed, coolant temperature, and hydraulic oil temperature.
Contained within the system are self diagnostic capabilities, which are displayed by error codes on the cluster.

Self Diagnosis System
The CPU controller diagnoses problems in the CAPO system caused by electric and hydraulic malfunctions and displays them on the LCD monitor
of the cluster by error codes. This controller has the capacity to identify 48 distinct types of errors. As the
information from this device, such as engine rpm, main pump delivery pressure, battery voltage, hyd.temperature, and the state of all types of electric
switches, provides the operator with a much more exact state of machine operating condition.
This makes the machine easier to troubleshoot when anything does go wrong.

Arm Flow Regeneration System
Arm flow regeneration valve provides smooth armin operation without cavitation.

Strong and Stable Lower Frame
Reinforced box-section frame is all welded, low-stress, high-strength steel.It guarantees safety and resistance against external impact when driving on rough ground and working on
wet sites through high tensile strength steel panels, with highly durable upper and lower rollers and track guards.
Long undercarriage incorporates heavy duty excavator style components.
X-leg type center frame is integrally welded for maximum strength and durability.

http://www.autoepccatalog.com/product/hyundai-heavy-industries-e-catalogue-epc-installation-service/