This instruction show you guide on how to remove and install steering valve for Bobcat compact tractor CT440.
All about Bobcat service repair manual here:
BOBCAT Service Library 2019 Q2 Service Repair Manual Download
Removal And Installation
NOTE: The following procedure is performed on a compact tractor equipped with HST. Although the photos may appear different the procedure is the same for compact tractors equipped with SST.
Remove the instrument panel.
Remove the two hoses (Item 1) from the steering valve.
NOTE: Mark hoses for correct installation.
Remove the two hoses (Item 1) from the steering valve.
Installation: Tighten the hoses to 25 - 29 N•m (18 - 22 ftlb) torque.
Remove the four mounting bolts (Item 1)
Installation: Tighten the bolts to 34 - 44 N•m (25 - 33 ftlb) torque.
IMPORTANT
When repairing hydrostatic and hydraulic systems, clean the work area before disassembly and keep all parts clean. Always use caps and plugs on hoses, tubelines and ports to keep dirt out. Dirt can quickly damage the system.
Remove the four fittings (Item 1) [Figure 20-40-5] from the steering valve.
Remove the seven end cap bolts (Item 1)
Remove the end cap (Item 1)
Remove the O-ring (Item 1)
https://www.autoepccatalog.com/product/bobcat-service-library-download-installation-service/
